Showing posts with label Stainless steel submersible pump. Show all posts
Showing posts with label Stainless steel submersible pump. Show all posts

Sunday, August 21, 2016

304 Stainless Steel Submersible Pump using condition

304 Stainless Steel Submersible Pump using condition:

1. 380V voltage deviation is no more than ±5%,frequency is 50HZ, three -phase power deviation is no more than ±1%.
2. Motor cavity must be filled with water.
3. The first stage impeller of the pump should be more than 2mm below the moving water surface, pump unit should be less than 70m below the static water level.
4. The distance from the motor bottom to well bottom must be more than 3m.
5. Water temperature should be no more than 20°C.
6. Sand content of the water ( by mass) should be no more than 0.01%.
7. PH value of water 6.5-8.5.
8. Hydrogen sulfide content of the water should be no more than 1.5mg/L.
9. Chloride ion content of the water should be no more than 400mg/L.
10. Water yield of water source should ensure the requirements of pump continuous working.

304 Stainless Steel Submersible Pump Application

304 Stainless Steel Submersible Pump Application:

Irrigation, drip irrigation, lift irrigation
Industry: cooling tower, high pressure
Domestic: high rise building, long distance puming,fountain, water parks, washer etc.

304 STAINLESS STEEL SUBMERSIBLE PUMP INTRODUCTION

304 Stainless Steel Submersible Pump

Flow: 10-500m3/h
Lift: 20-300m
Caliber: φ175~φ400mm
Power: 0.4-160KW
Temperate: <=20℃
Quality certificate:One year warranty and lifelong maintenance
Skype: welpump
Email:info@welpump.com
Service hotline: +86-021-57852396

If you don't understand 304 Stainless Steel Submersible Pump, and need guidance about model selection or want our technicist to select a suitable model for you, please email us.

Friday, August 19, 2016

4SP Stainless steel well submersible multistage electric pump

Product Oview

4SP type stainless steel multistage deep well submersible pump is a new high-grade machine for getting underground water. It is widely used for water supply and discharge in industrial and mining enterprises, for farm land irrigation, for getting underground water for private use. The main parts of the pump are all made of stainless steel and copper alloy, so has such features as anti-corrosion, wear resistance, energy-saving, high efficiency and fully reliable. Besides, as it has compact structure, small and light, it is easy to maintain, transport, install and use. When used in combination with automatic energy-saving high efficiency control box, it can be protected against over temperature, short circuit, over load and under voltage, safe and reliable to use.

Application range

Water supply system
Boost
Agricultural irrigation
All kinds of industrial purposes

Working Condition

1.Solid matter in water shall not be over 0.01% (weight ratio);
2.Chemical substances content in water shall not be over 1.5mg/L;
3.Ion content in water shall not be above 400mg/L;
4.Water PH value: 6.5~8.5;
Voltage: three-phase 380V±10%, single-phase 220V±10%;
Motor power: single phase 0.37KW—2.2KW, three-phase 0.55KW—7.5KW.

Product features

1. Full lift structure
2. All stainless steel anti-corrosive structure
3. High lift, large flow, energy-saving
4. New “float type”, no axial pressure force
5. Excellent performance in pumping water with sands; impeller and discharge bowl are made of wear resistant material.
6. The pump and the motor matches well with corresponding sizes. You can assemble or change them freely.
7. Pressure balance film, can reach as deep as 120m under water.

Paramter

Motor:
Max flux: 20m3/h
Accord with NEMA standard
Insulation grade: B
Protective grade: IP68
Max external diameter: Ф95mm
Max liquid temperature: 35℃